USB, Optical or Coaxial? Connecting a Gaming Sound Card the Right Way


You have decided that a better audio unit is worth having. Now comes a practical question that trips up many first time buyers: how do you connect it? Boxes of this kind come with several different inputs and outputs, and each one has its own purpose. This article walks through the connection types listed on the Fosi Audio gaming sound card collection page and explains when each is useful.

The list of connections

The collection page says the products in the range use a mix of USB, optical, coaxial, Bluetooth, 3.5 mm, 6.35 mm and RCA connections, with the exact set depending on the model. It does not give a table showing which model has which, so always check the individual product page before ordering. Here is what each type means.

USB

USB is the most common way to connect an external audio unit to a computer. One cable carries the digital signal, and in many cases it also provides power to the unit. It is easy to use, because most computers recognize the device automatically. USB is a good choice for desktop and laptop use, and it is the usual method for plug and play units such as the compact DS3 described on the page.

When using USB, plug directly into a port on the computer where possible. Hubs can share power and bandwidth, and in some cases this causes noise or dropouts. If you hear clicks or interruptions, try a different port or a shorter cable.

Optical

Optical, sometimes called Toslink, sends the digital signal as pulses of light through a plastic or glass cable. One advantage is that it keeps the sending device electrically separate from the receiving unit, which prevents some kinds of interference. It is found on many televisions, consoles and computers.

Optical cables should be handled with care. Do not bend them sharply, and keep the plugs clean and fully inserted. The connector is shaped so that it only fits one way.

Coaxial

Coaxial also carries a digital signal, but over an electrical cable with an RCA style plug, usually orange or marked as digital. It is used by some players and other equipment. Because it looks like an ordinary RCA cable, it is easy to mix up with analog cables. Check the labels on both ends, and use a cable intended for digital signals.

Bluetooth

Bluetooth is wireless. It is convenient, especially with a phone or tablet, but it compresses the signal and adds a short delay. For most uses that is acceptable. For timing sensitive activities, such as games where sound must match the picture exactly, a wired connection is usually the safer option.

3.5 mm and 6.35 mm

These are the familiar headphone plugs. The 3.5 mm size is the small one found on most phones, laptops and gaming headsets. The 6.35 mm size, sometimes called one quarter inch, is the larger plug used on many studio style headphones. If your headphones have one size and your unit offers the other, a small adapter solves the problem. Use a good quality adapter, since cheap ones can be a source of crackling or loose connections.

RCA

RCA connectors are the pairs of red and white sockets found on a wide range of audio equipment. They carry an analog signal, one for each of the left and right channels. A unit with RCA outputs can send its signal to powered speakers or an external amplifier. If you want to connect the unit to speakers instead of headphones, RCA is often the simplest route.

Planning your setup

Start with your source. If it is a computer, USB is usually the easiest. If it is a television or console that has an optical output, an optical link may suit. Next, decide where the sound goes. Headphones can use the 3.5 mm or 6.35 mm jack, while speakers may use RCA.

Write down what you own, such as headphones, speakers, a computer and perhaps a console. Then compare these needs with the connections listed for each product. A unit with fewer connections may be cheaper but could limit you later.

Check the settings

Many problems after setup come from settings, not equipment. On a computer, open the sound settings and select the new unit as the default output. Check that the volume is set to a reasonable level on both the computer and the unit. If you use both headphones and speakers, make sure the right output is active.

If you hear no sound, check that the cable is fully inserted, that the correct input is chosen on the unit and that nothing is muted.

Keep volume safe

Always start with the volume low and raise it slowly. A powerful headphone output can be loud enough to hurt your hearing, particularly with sensitive headphones. The page says the headphone output supports impedances of 300 ohms and above, which indicates strong output, so take extra care with lower impedance headphones.

Final tip

Do not buy on specifications alone. Make a short list of your devices and cables, check the connections on the product page and confirm that they match. A few minutes of planning can save hours of frustration, and it helps your equipment work smoothly from the first day.